Initialize Floorplan¶
Commands¶
Initialize Floorplan¶
initialize_floorplan
[-site site_name] LEF site name for ROWS
-die_area "lx ly ux uy" die area in microns
[-core_area "lx ly ux uy"] core area in microns
or
-utilization util utilization (0-100 percent)
[-aspect_ratio ratio] height / width, default 1.0
[-core_space space
or "bottom top left right"] space around core, default 0.0 (microns).
Should be either one value for all margins
or 4 values, one for each margin.
The die area and core area used to write ROWs can be specified explicitly with the -die_area and -core_area arguments. Alternatively, the die and core areas can be computed from the design size and utilization as shown below:
core_area = design_area / (utilization / 100)
core_width = sqrt(core_area / aspect_ratio)
core_height = core_width * aspect_ratio
core = ( core_space_left, core_space_bottom )
( core_space_left + core_width, core_space_bottom + core_height )
die = ( 0, 0 )
( core_width + core_space_left + core_space_right,
core_height + core_space_bottom + core_space_top )
Make Tracks¶
The initialize_floorplan command removes existing tracks. Use the
make_tracks command to add routing tracks to a floorplan.
make_tracks [layer]
[-x_pitch x_pitch]
[-y_pitch y_pitch]
[-x_offset x_offset]
[-y_offset y_offset]
With no arguments make_tracks adds X and Y tracks for each routing layer.
With a -layer argument make_tracks adds X and Y tracks for layer with
options to override the LEF technology X and Y pitch and offset.
Place pins around core boundary¶
auto_place_pins pin_layer_name
This command only allow for pins to be on the same layer. For a more complex pin placement strategy please see the pin placement documentation here.
Example scripts¶
Regression tests¶
Limitations¶
FAQs¶
Check out GitHub discussion about this tool.
License¶
BSD 3-Clause License. See LICENSE file.